ABNM-480280 4MeV container truck vehicle security inspection system

ABNM-480280 4MeV 150mm steel penetration container truck vehicle security inspection system

The ABNM-480280 4MeV 150mm steel penetration container truck vehicle security inspection system

is designed to optimize security checks at ports, airports and boarder crossings. This system are used to inspect

whole trucks for threats such as weapons, of mass destruction(WMDs) contraband, as well as manifest

verification, reducing the need of manual inspection.

The ABNM-480280 inspection system use a good range of accelerators, allowing steel penetration ranging

150mm, while providing a high throughput up to 24 trucks per hour.

The system ‘s high performance imaging capability provides the operator with detailed radioscopic images

of container or vehicle and its contents, allowing for rapid and reliable results.

When equipped with the automatic radioactive material detection-ARD(optional), the ABNM-480280 inspection

system simultaneity carries out both the presence of radioactive gamma and/or neutron materials within the

container of vehicle.

The modular design of the system provides the ability to be relocated, adapting to the customer’s specific

needs. The system is a standalone unit which requires limited external infrastructure. The system is designed

for ease of operation with a minimal footprint, while still integrating the most demanding international

security screening requirements.

The systems have been proven to be an indispensable tool for Customs agencies and low enforcement

authorities worldwide.

Feature Hightlings

Inspect loaded trucks, containers and vehicles at ports, airports and boarder crossings.

High trhoughpu of up to 24 trucks per hour

Steel penertation up to 150mm steel.

Requires minimal system operators

General Specifications

Motorization: Electric motor piloted by frequency controller

Weight: 27 tons

Scanning speed: 24m/min （80fpm)

Foot print: [W*L*H]: 12m*29m*6.5m

Scanning height: From 0.48m to 4.7m(1.6’ to 15.4’)- no corner cut-off for 2.5m(8.2’) width

Maximum height below gantry: Maximum height below gantry: 4.8m(15.7’)

Max. Dimensions:

[H*W*L]: 4.7m*2.8m*19m(15.4’*11.5’*62.3’) standard/up to 45m(148’) long

optional

Inspection throughput: 23trucks/hour

Penetration Upto 150mm steel

Electrical consumption: Average consumption 20kVA

Storage Temperature/Humidity -20℃ to +60℃

Operation temperature/Humidity 0℃ to +40℃

Relative humidity: 10% to 90%

Operation Power 220VAC(±10%) 50±3Hz (Optional: 100VAC,110VAC,120VAC,200VAC)

Nominal energy (MeV) Levels available to max 4MeV

Scanning Principle:

The gantry X-Ray system moves while the container or vehicle remains

stationary

Installation time: Six weeks(depending on configuration)

Minimum crew requirement: 1 image operator, 1 traffic controller

Computer system

Image workstation (RIW): Two 22’’ flat LCD screen workstations

Image analysis tools:

Contrast and edge enhancement, Linear transformation , logarithmic

transformation, marks histogram equalization, zoom, image conversion to

standard formats,

review of stored images and manifest data for comparison

Database workstation (DBW) SQL database

Data storage: 20‚ 000 images as standard (RAID disk)

Data archiving: DVD burner

Supervision station (CMW) One 22’’ flat LCD screen

Printer: Color laser printer

Network: DMS ready (Data Management System)

Radiation protection safety

Surveillance: Access controlled by infrared barriers

Markings: Three-color indicator lamps, sirens & regulatory displays

Regulations:

In compliance with WHO, ICRP 103(’09 update of ICRP 60), EU & US

regulations

Health & security

Dose in the environment: Less than 2 µSv/hour (average outside safety area) and less that 4mSv/year

Dose rate in operator room: Less than 0.5 µSv/hour (average) and less than 1mSv/year

Options

ARD™: Automatic radioactive material detection (gamma)

ARD n: Automatic radioactive material detection (gamma, neutron)

Radiation protection: Concrete walls, shielding doors

Operator bungalow: Air conditioned, natural lighting

Two-vehicle scan: Scan of two trucks in one pass

Image workstation(RIW): Station(s) with additional 22’’ LCD flat screen/manifest screen optional

Check-In workstation(CIW): Station(s) with manifest and data recording scanner

Re-Check workstation(RCW): Workstation to re-check suspicious images (easier searching)

Check-out workstation(COW): Station(s) for recording and checking at end of treatment

Maintenance workstation(RMW): Remote maintenance workstation

Training workstation (TS): Integrated system dedicated to image operator training

Archiving: Portable hard disks, 35 to 90 GB/disk, 350 GB with autoloader