Installation methods for EAS anti-theft systems in supermarkets
What are the installation methods for EAS anti-theft systems in supermarkets?
How to install anti-theft devices in supermarkets? Which installation method is simpler?
There are three installation methods for supermarket anti-theft devices as follows:
① Pre-buried pipe installation method
② Slotting and wiring installation method
③ Anti-stepping groove installation method
The pre-buried pipe installation method is suitable for use in stores that have not yet been fully decorated. Customers can purchase supermarket anti-theft devices before the decoration. We will recommend the styles of supermarket anti-theft devices to you based on the actual distance between the doors of your store, and determine the quantity to be installed and the installation distance in the passageways. The construction party then reserves the conduit according to the anti-theft device installation plan we provided. When installing the anti-theft device, the connection wires of the anti-theft device can be connected by passing through the pre-buried conduit.
The advantage of the pre-buried pipe installation method lies in the concealment of the connecting wires, which ensures the aesthetic appeal of the store and enhances the customer experience when entering the store.
The two methods of cutting grooves for wiring and installing with anti-stepping grooves are suitable for stores that have already been decorated. Since the renovated store can no longer reserve conduits under the floor, only these two methods can be used.
Among them, the installation method of the anti-stepping groove is simpler. Just stick the anti-stepping groove directly on the ground, and the connection lines of the main and auxiliary units can be connected through the anti-stepping groove.
The installation method of cutting grooves and burying wires requires cutting off a part of the floor area, then placing the main and auxiliary machine connection wires in the cut grooves on the floor, and finally covering it with stainless steel wire grooves.
The installation method of the anti-step groove is the simplest, but since it is laid on the ground, its aesthetic appeal is the lowest. Moreover, as the anti-step groove protrudes, it is prone to causing tripping. The slotted and buried wire installation method, since the ground remains flat, has relatively good aesthetic appeal and safety.
Overall, in terms of simplicity:
Anti-stepping groove installation method > slotted wire burial installation method > pre-buried pipe installation method
In terms of aesthetic appeal:
Pre-buried pipe installation method > slotted wire burial installation method > anti-stepping groove installation method
So, if your store has not yet been renovated, it is recommended to use the pre-buried pipe installation method. If it has already been installed, you can choose the slotted and buried pipe installation method or the anti-stepping groove installation method by yourself.
Furthermore, regarding the fixation method of the equipment, there are also two options available.
One is the expansion screw fixation method, and the other is the nail-free adhesive fixation method. The most commonly used method is the expansion screw fixation method, which involves driving expansion screws into the ground for fixation. However, since some shopping malls do not allow merchants to tighten screws privately, the method of fixing with glue can come in handy.
