SMD600 PLUS-MI2 Italy QIA CEIA Mobile Metal Detection Door

SMD600 PLUS-MI2 Italy QIA CEIA Mobile Metal Detection Door

SMD600 PLUS-MI2 TM MULTI-SENSOR WALK-THROUGH DETECTOR

SMD600 Plus - MI2TM is used to detect various metal (magnetic, non-magnetic) firearms, mobile phones (including mini and low metal content types) and other items carried by personnel, while ensuring low false alarm rates under high pass rates. The new composite SMD600 PLUS - MI2TMMCEIA SMD600 Plus, 288 channel, NIJ0601.02 is a step in metal detector that can simultaneously distinguish weapons and personal metal items. The mobile phone detection, the new CEIA MSD EVOTM identification ability, and the advanced static magnetic 18 axis detector ensure the uniformity and anti-interference of detection. As for itself, the CEIA SMD600 Plus mobile security checkpoint is a fully functional and efficient product in the field of high-sensitivity detection. It can detect various metal weapons, mobile phones, etc., such as those used in prisons, to ensure that prisoners do not carry or rarely carry metal items.

In addition, this new SMD600 Plus - MI2 mobile phone detection security door can efficiently inspect prison visitors. Generally speaking, removable/non removable weapons, various types of mobile phones, and other items carried by personnel can be detected with low false alarm rates at standard sites.

The new SMD600 Plus - MI2TM also sets specific sound and light warning signals for weapons and mobile phones to facilitate secondary inspections. SMD600 PLUS - MI2TMM Highlight Size

∫ Detecton targets: all metal weapons (magnetic, non-magnetic, and light alloy), front, side, bottom, and various types of mobile phone detectors

∫ Operation and use: At standard inspection stations, efficiently check personnel who have passed the inspection

∫ Places of use: prisons, data sensitive conference rooms, places where weapons and mobile phones are restricted, electronic device theft prevention, commercial espionage prevention, etc

Mobile security checkpoint bidding related content:

Procurement demand for prison mobile phone detection doors

Detection range: It can accurately detect electronic products such as mobile phones, laptops, digital cameras, and camcorders that are turned on or off (including removing batteries and SIM cards), and can provide location alarms. (Excluding metal items such as cigarettes, lighters, belt buckles, keychains, etc. that are carried with you on a daily basis).

1.The unit and analog board form a signal sorting and filtering unit, which realizes the acquisition and frequency selective amplification of specific weak analog signals.

2. Through type detection system, each door is equipped with 10 detection units. The thickness of the metal security door is less than 8cm, the width of the whole machine is less than or equal to 91cm, and the weight of the whole machine is not more than 110 kilograms.

3. The detection unit is composed of a through type detection system, which has anti-interference ability and can adapt to installation sites with large metal interference. For example, communication equipment detectors can be installed side by side with a spacing of no more than 30cm.

4. The technology utilizes the principle of electromagnetic induction and eddy current effect, and adopts digital signal processing technology.

5. The sampling processing module (acquisition card) adopts the structure of "floating point operation microprocessor+FPGA field programmable gate array", with a microprocessor clock frequency>100MHz and Flash>256KB; FPGA field programmable gate array combined with sampling chip for dual channel signal sampling, with a sampling rate>20MHz. Cooperate with corresponding embedded software to implement sampling and processing functions.

6. When the inspected personnel pass through in a normal and standardized posture, they can detect smartphones, mobile phone batteries, laptops, etc. that are turned on or off, while excluding metal items such as watches, cigarettes, lighters, belt buckles, and keychains that they carry with them on a daily basis.

7. The detection device can still sound an alarm when the earpiece and microphone are removed from the phone.

8. Personnel carrying mobile phones can provide real-time alarms, with a detection time of less than 1 second and a passing efficiency of over 30 people per minute.

9. The detection system control module can eliminate interference from magnets and magnetic belt buckles to detect the phone hidden under the belt.

10. There is no blind spot in the top area, and the detection accuracy of four or more testers with different heights (each with a height difference of more than 4cm) hiding their smartphones inside the hats on their heads must reach over 90%.

11. The phone can be hidden on the inner thigh through the door and must sound an alarm.

12. The testing equipment is capable of providing textual and visual prompts for alarm item categories, with item categories greater than or equal to three categories. For example, mobile phones, machetes, firearms, and tin cans.

13. A certain amount of human interference will trigger an alarm prompt, and the system will still sound an alarm when detected through communication devices at an extremely slow speed (the time can be set according to user requirements, such as 6 seconds).

14. The system control module should reserve peripheral interfaces, which can directly link the alarm of the tested personnel carrying their mobile phones with the gate. Once it is found that the personnel carrying their mobile phones are swinging the gate, it will be in a closed state and the tested personnel cannot pass through; On the contrary, if the person being tested does not carry a mobile phone, they can pass through.

15. The system control module should be linked with the peripheral intelligent display terminal, requiring the intelligent display terminal to display the virtual humanoid alarm location and display the category of the alarm item in the form of pictures.

16. The terminal has the function of recording the number of people and alarms, storing historical data, and can filter and extract information such as alarm time and alarm items according to needs.

17. Provide qualifications (to ensure product quality)

(1) Provide the original inspection report of the Ministry of Public Security for the security checkpoint

(2) Provide metal detection equipment certificates issued by national authoritative institutions

Basic parameters

Dimensions: 2225mm (height) x 660mm (side width) x 720mm (inner width)

Net weight: 78Kg

Color: RAL7040 light gray

Power supply: 115/230VAC,+-15%, 45-65Hz, 30VA

Operating temperature: -15 ℃ -+65 ℃

Relative humidity: 0-95% (without condensation)